Tough Resin Ultra：Low-Odor. This formulation is of low order and non-irritating, fostering a serene and comfortable printing environment. Its composition significantly minimizes volatile organic compounds, making it an environmentally-friendly and green choice.

Bio Resin：Eco-Friendly & Body-Friendly. Anycubic Bio Resin is formulated with biofriendly ingredients, making it less irritating and odorless. This resin has successfully met the CEN Toy Safety Standard EN 71-3 and has obtained several important biosafety certifications, such as tests for in vitrocytotoxicity, skin sensitization tests, and animal irritation tests by skin exposure.

Plant-based Resin：Truly Eco-friendly. Based on the market demand for green, safe and eco-friendly resins. Anycubic Plant-based Resin was launched to meet users' need, and it is made from soybean oil extract, truly environmentally friendly.

Water-Wash Resin：No chemical solvents required — rinse with water for easy, eco-friendly use.

• Shake the liquid resin before use.
• Clean the resin tank and the molding platform to keep the bottom of the resin tank in lighttransmission.

• Unscrew the cap and add it to the resin tank according to the equipment requirements.
• Select the correct print parameters and settings for printing.

• After printing, please use the matching tools for post-processing, including blade, diagonalpliers, tweezers, containers, gloves.
• ethanol(≥95%), lactate or isopropyl alcohol cleaning solution.

• A. Remove the printed model from the molding platform with a blade.
• B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then takenout and drained; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.
• C. Proper processing, such as removing support, polishing, coloring, etc.

• The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
• Suggested operating temperature is 18-35'c, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60°C).
• If the resin pigment settles, it can be used after stirring or shaking.
• In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
• To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
• To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended：
• 1. The intensity of mercury lamp or LeD light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation)
• 2. The exposure time in the sun (summer) is around 1 hour
• 3. Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited
• 4. lt is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive material.